Difference between revisions of "Laser Engraving Machine"

Revision as of 16:06, 14 February 2019

The model of the Laser Engraving Machine located in Hackerspace.gr (Ampatiellou 11, 11144, Athens) is HQ-3020B. It is capable of cutting, engraving, and marking a number of different materials quickly and accurately when driven from CAD software such as CorelDraw and Inkscape.

Contents:

- How to use it

- Materials that can and cannot be laser-cut [1]

- Useful links

- Projects

How to use it:

Download:

> Inkscape [2]

> K40 Whisperer [3]

To create your file:

> Open Inkscape

> Draw your design with lines

> Make colors in RGB (RED to engrave, BLUE to cut)

> Select correct Document Properties:

- UNITS must be all in MM

- RESIZE page to content

> Save as .svg file.

To cut your file:

> Connect computer and machine with USB cable

> Switch on the machine:

- Switch power on

- Switch light on

- Plug-in air - compressor

In K40 Whisperer:

( > Open K40 Whisperer )

> Initialize laser-cutter

> Open design file

> Adjust starting point and speed in K40 Whisperer

On the machine:

> Place your material inside (it must be no bigger than A4)

> Adjust power on machine

> Make test

> First engrave (BLUE) and then (CUT) by clicking "Vector Engrave" and "Vector Cut" in "K40 Whisperer".

Make sure temperature does not exceed 30 °C

> Switch off machine

> Clean up gently with vacuum cleaner

Useful links

> boxes.py [4]

> obrary [5]

Projects

> what is cosmos / τι είναι κόσμος

This text contains information copied or inspired from http://atxhackerspace.org .